recovery.cに何かヒントがあるのではないかと。
コードリーディングする前にコメント読んでみた。
* FACTORY RESET
* 1. user selects "factory reset"
* 2. main system writes "--wipe_data" to /cache/recovery/command
* 3. main system reboots into recovery
* 4. get_args() writes BCB with "boot-recovery" and "--wipe_data"
* -- after this, rebooting will restart the erase --
* 5. erase_root() reformats /data
* 6. erase_root() reformats /cache
* 7. finish_recovery() erases BCB
* -- after this, rebooting will restart the main system --
* 8. main() calls reboot() to boot main system
*
* OTA INSTALL
* 1. main system downloads OTA package to /cache/some-filename.zip
* 2. main system writes "--update_package=CACHE:some-filename.zip"
* 3. main system reboots into recovery
* 4. get_args() writes BCB with "boot-recovery" and "--update_package=..."
* -- after this, rebooting will attempt to reinstall the update --
* 5. install_package() attempts to install the update
* NOTE: the package install must itself be restartable from any point
* 6. finish_recovery() erases BCB
* -- after this, rebooting will (try to) restart the main system --
* 7. ** if install failed **
* 7a. prompt_and_wait() shows an error icon and waits for the user
* 7b; the user reboots (pulling the battery, etc) into the main system
* 8. main() calls maybe_install_firmware_update()
* ** if the update contained radio/hboot firmware **:
* 8a. m_i_f_u() writes BCB with "boot-recovery" and "--wipe_cache"
* -- after this, rebooting will reformat cache & restart main system --
* 8b. m_i_f_u() writes firmware image into raw cache partition
* 8c. m_i_f_u() writes BCB with "update-radio/hboot" and "--wipe_cache"
* -- after this, rebooting will attempt to reinstall firmware --
* 8d. bootloader tries to flash firmware
* 8e. bootloader writes BCB with "boot-recovery" (keeping "--wipe_cache")
* -- after this, rebooting will reformat cache & restart main system --
* 8f. erase_root() reformats /cache
* 8g. finish_recovery() erases BCB
* -- after this, rebooting will (try to) restart the main system --
* 9. main() calls reboot() to boot main system
*
* ENCRYPTED FILE SYSTEMS ENABLE/DISABLE
* 1. user selects "enable encrypted file systems"
* 2. main system writes "--set_encrypted_filesystem=on|off" to
* /cache/recovery/command
* 3. main system reboots into recovery
* 4. get_args() writes BCB with "boot-recovery" and
* "--set_encrypted_filesystems=on|off"
* -- after this, rebooting will restart the transition --
* 5. read_encrypted_fs_info() retrieves encrypted file systems settings from /data
* Settings include: property to specify the Encrypted FS istatus and
* FS encryption key if enabled (not yet implemented)
* 6. erase_root() reformats /data
* 7. erase_root() reformats /cache
* 8. restore_encrypted_fs_info() writes required encrypted file systems settings to /data
* Settings include: property to specify the Encrypted FS status and
* FS encryption key if enabled (not yet implemented)
* 9. finish_recovery() erases BCB
* -- after this, rebooting will restart the main system --
* 10. main() calls reboot() to boot main system
